tman07
Feb 14, 09:48 PM
although im pretty sure there is already a thread on this somewhere.... my favorites are any of the DMB live dvd's.
Then again, i love DMB, so... yeah... haha
Then again, i love DMB, so... yeah... haha
stroked
May 3, 11:29 AM
No, but you could do a block copy restore of the install DVD to a small partition on either its drive, or an external HD connected to that machine.
If the 2nd machine is an Intel Mac, its drive will be partitioned using a GUID map. PPC Macs can't boot to a drive using that map - it must be APM. So, if the preceding is true, you will need an external drive partitioned using APM (in the Disk Utility "Partition" tab, click on "Options..." to set the map type).
To make the bootable copy on your other machine's HD (or external drive), run Disk Utility and create a small (10GB should be enough) partition formatted Mac OS Extended (also making sure to set APM as the partition map type). Then, use Restore to copy the DVD to that new partition, making sure to check "erase destination" (which enables block copy).
Start up your other (2nd) Mac using FireWire Target Disk mode (hold down 'T' at startup). Now, when you startup the iMac G4, hold down the 'option', then select the partition you cloned the DVD to on your other machine. You should be able to startup on it, and during install, select the iMac's HD as the install target.
Hope that's not too confusing - I mixed "other" and "2nd" when describing your not-iMac-with-working-DVD machine. The bottom line is to access a bootable partition on that machine that you can boot off of using that machine in Target Disk Mode, connected to the iMac via FireWire.
Or, find an external FireWire DVD drive for the iMac. :)
Wouldn't another option be to use the DVD drive from the 2nd mac in target disk mode, even if the 2nd mac is Intel?
If the 2nd machine is an Intel Mac, its drive will be partitioned using a GUID map. PPC Macs can't boot to a drive using that map - it must be APM. So, if the preceding is true, you will need an external drive partitioned using APM (in the Disk Utility "Partition" tab, click on "Options..." to set the map type).
To make the bootable copy on your other machine's HD (or external drive), run Disk Utility and create a small (10GB should be enough) partition formatted Mac OS Extended (also making sure to set APM as the partition map type). Then, use Restore to copy the DVD to that new partition, making sure to check "erase destination" (which enables block copy).
Start up your other (2nd) Mac using FireWire Target Disk mode (hold down 'T' at startup). Now, when you startup the iMac G4, hold down the 'option', then select the partition you cloned the DVD to on your other machine. You should be able to startup on it, and during install, select the iMac's HD as the install target.
Hope that's not too confusing - I mixed "other" and "2nd" when describing your not-iMac-with-working-DVD machine. The bottom line is to access a bootable partition on that machine that you can boot off of using that machine in Target Disk Mode, connected to the iMac via FireWire.
Or, find an external FireWire DVD drive for the iMac. :)
Wouldn't another option be to use the DVD drive from the 2nd mac in target disk mode, even if the 2nd mac is Intel?
R94N
Nov 4, 10:35 AM
Quite a nice idea - one of the other forums I visit uses VBulletin software as well and it has the photos.
zagato27
Feb 12, 10:39 PM
I have this mouse and it is the absoltue best mouse I have ever owned or tried. Very smooth, use on a pad, off a pad, use it from 20 ft away on a hardwood floor (I have tried it!!)
It has a rechargeable battery that lasts forever, is EXTREMELY comfortable in your hand and has a multitude of controls at your fingertips. (scroll wheel up and down as well as left and right, a button that works like the command+tab button feature, etc. All are programable via a system preference. Best of all, it was recognized as soon as I plugged it in.
Can't say enough about it, well worth the $79.
Me Too! Me Too! I've got one and it's super. Was using a Kensington Track pad but just couldn't get it's 4 buttons working correctly. Went back to the Apple "hockey puck" and boy was it painfull. Finally a mouse with lft/rt buttons; scroll wheel; and more. Feels great in the hand, BTW I'm right handed so can't comment bout lefties. LED's for battery are a very nice touch. Holds a charge for a long time. This mouse is soooooo coool. The only way they could make it better would be if it were BT. I wish, my G5 has BT. Considered the Logitech MX 900 but it doesn't specifically say that it supports OSX. MX 1000 does support OSX. Great mouse. The only other mouse I'm so enthusiastic about is the BenQ M310. It's a laptop mouse and I got it for my wife's iBook. Boy, this is another "slick" mouse. Highly recommend if you've got a laptop that doesn't have BT. If you've got a laptop and it has BT you might want to look at the RadTech BT 500. Cheers
It has a rechargeable battery that lasts forever, is EXTREMELY comfortable in your hand and has a multitude of controls at your fingertips. (scroll wheel up and down as well as left and right, a button that works like the command+tab button feature, etc. All are programable via a system preference. Best of all, it was recognized as soon as I plugged it in.
Can't say enough about it, well worth the $79.
Me Too! Me Too! I've got one and it's super. Was using a Kensington Track pad but just couldn't get it's 4 buttons working correctly. Went back to the Apple "hockey puck" and boy was it painfull. Finally a mouse with lft/rt buttons; scroll wheel; and more. Feels great in the hand, BTW I'm right handed so can't comment bout lefties. LED's for battery are a very nice touch. Holds a charge for a long time. This mouse is soooooo coool. The only way they could make it better would be if it were BT. I wish, my G5 has BT. Considered the Logitech MX 900 but it doesn't specifically say that it supports OSX. MX 1000 does support OSX. Great mouse. The only other mouse I'm so enthusiastic about is the BenQ M310. It's a laptop mouse and I got it for my wife's iBook. Boy, this is another "slick" mouse. Highly recommend if you've got a laptop that doesn't have BT. If you've got a laptop and it has BT you might want to look at the RadTech BT 500. Cheers
more...
cjw
Sep 21, 02:40 PM
Originally posted by King Cobra
Yeah. Apple updated their PowerMacs (1250MHz model) to be ready for shipping.
As for the $5000 model, I think that's ridiculous, considering you can get an extra 512MB from MacMall, I think.
From what I saw when I was shopping for my dual 867 a week or so ago, MacZone has the best deal.
Yeah. Apple updated their PowerMacs (1250MHz model) to be ready for shipping.
As for the $5000 model, I think that's ridiculous, considering you can get an extra 512MB from MacMall, I think.
From what I saw when I was shopping for my dual 867 a week or so ago, MacZone has the best deal.
Lord Blackadder
Sep 7, 09:59 AM
Lance has said he'll retire or has even retired before I think, but coming out of retirement 'just to p*ss them off' is a bit lame.
Well, I don't think he'd go to that much trouble just to taunt the French media...If he does race I think the reason will be because that's what he does, and he doesn't want to stop.
Although, maybe it would be better for him to start competing in other Tours like the Giro d'Italia - he's already put his stamp firmly on the Tour de France.
PS. Don't diss MJ - you run a good chance of being struck down.... ;)
LOL, I never was much of a basketball fan but it was sad to see such a legend fade away like he did - it was just too hard to let go.
Well, I don't think he'd go to that much trouble just to taunt the French media...If he does race I think the reason will be because that's what he does, and he doesn't want to stop.
Although, maybe it would be better for him to start competing in other Tours like the Giro d'Italia - he's already put his stamp firmly on the Tour de France.
PS. Don't diss MJ - you run a good chance of being struck down.... ;)
LOL, I never was much of a basketball fan but it was sad to see such a legend fade away like he did - it was just too hard to let go.
more...
fcortese
Mar 24, 10:53 AM
I would suggest this could be the problem: when you reposition you are probably altering the distance between the lens and the subject somewhat.
Agree with robbie, with that shallow a DOF when you reposition if you're off a little the focus might change. Try using a DOF of 4 and see what happens. Your bokeh effect will obviously be different but you may have more consistent pictures. FWIW
Agree with robbie, with that shallow a DOF when you reposition if you're off a little the focus might change. Try using a DOF of 4 and see what happens. Your bokeh effect will obviously be different but you may have more consistent pictures. FWIW
archer75
May 6, 06:34 PM
I run a windows server at home with my movie collection and it has that uptime and then some.
In fact the only time it goes down is when the power goes out or I turn it off when I go on vacation.
On my acer windows 7 laptop, aside from going to sleep I haven't restarted it in months.
In fact the only time it goes down is when the power goes out or I turn it off when I go on vacation.
On my acer windows 7 laptop, aside from going to sleep I haven't restarted it in months.
more...
MacHamster68
Mar 2, 08:54 PM
:) was it not also usable as a computer , if i remember that right it had a logic board of macintosh's from that time with some alterations , but could be used for internet access and OS 8 would run on it , only not meant to be a macintosh , so i guess apple placed it in the wrong market ,instead of selling it as a games console they should have sold it as a macintosh able to be used as a games console could have been a hit :D
galstaph
Dec 21, 08:44 PM
Definitely simplify it, too many concepts competing for attention.
Try designing around one main concept, use fewer fonts and font sizes.
Do not clutter it up with all the leaves and doodads... it just makes it look too busy and therefore unappealing.
Simple simple simple, especially as you are just starting out. Clarify your most important concept, sketch it out with a pencil, rework it until it feels right. Also look on the net at ads that appeal to you, what did they do that works for you, how can you incorporate those layout/concept ideas into your own work to make it better? Take all that and your sketches work them together and then make it digital and come back to us, I'll bet dollars to donuts it'll be a lot nicer and more coherent and cohesive, just keep at it:).
BTW, the leaves make me think I can recycle my compost/tree leaves there as well, if this is for electronics, I think you can leave them out (no pun intended)
Try designing around one main concept, use fewer fonts and font sizes.
Do not clutter it up with all the leaves and doodads... it just makes it look too busy and therefore unappealing.
Simple simple simple, especially as you are just starting out. Clarify your most important concept, sketch it out with a pencil, rework it until it feels right. Also look on the net at ads that appeal to you, what did they do that works for you, how can you incorporate those layout/concept ideas into your own work to make it better? Take all that and your sketches work them together and then make it digital and come back to us, I'll bet dollars to donuts it'll be a lot nicer and more coherent and cohesive, just keep at it:).
BTW, the leaves make me think I can recycle my compost/tree leaves there as well, if this is for electronics, I think you can leave them out (no pun intended)
more...
bella92108
Mar 28, 06:16 PM
As a new iPad 2 owner this thread is torturing me, haha. Seeing all the fun jailbreak can make a bland iPad 2, and I have no way to JB. :-(
RedTomato
Mar 31, 06:47 PM
Attach any tripod, even a cheap one. Extend legs of tripod, but don't open it out. Just hold it and use it as a stabilising arm, either grounded, or off the ground.
I've had excellent results like that. Bonus is you can use it as a handheld crane and get very good angles you couldn't get otherwise.
I've been known to open the elbow to 90 degrees and run along with the camera an inch above the grass to get the worm's eye view.
I've had excellent results like that. Bonus is you can use it as a handheld crane and get very good angles you couldn't get otherwise.
I've been known to open the elbow to 90 degrees and run along with the camera an inch above the grass to get the worm's eye view.
more...
lucascantor
Oct 18, 10:16 PM
I live right near the Ardmore store, so I'll be going there for the release, but I already ordered my copy online just to make sure I get it.
Eidorian
Dec 9, 10:56 AM
I second the heater function. The only problem I have is it takes some time to warm up. Yeah...that's in the room I SLEEP in.
http://forums.macrumors.com/attachment.php?attachmentid=35481&d=1132930895
http://forums.macrumors.com/attachment.php?attachmentid=35481&d=1132930895
more...
blueroom
May 5, 01:31 PM
A NAS like Synology or QNAP make. They also act as TimeMachine backups.
darylsudden
Mar 17, 02:35 AM
ohmaigawdthisisearly. I think I'd line up a few hours earlier.... about 4 'o clock or something
more...
James Craner
Sep 28, 01:10 PM
I've been a PC user all my life...until yesterday. I just bought my first Mac. Now I want to know if there is any way that I can move my iTunes library from my PC to my PowerBook without having to rip all of my cds again.
I moved the actual song files onto my iPod in hard drive mode and then copied them to my PowerBook, but now my PowerBook will not let me import those songs into iTunes.
Suggestions? Am I SOL?
You need to use the add to library option rather than import.
I moved the actual song files onto my iPod in hard drive mode and then copied them to my PowerBook, but now my PowerBook will not let me import those songs into iTunes.
Suggestions? Am I SOL?
You need to use the add to library option rather than import.
RebeccaL
Apr 8, 07:16 PM
Check out Larry Greenber's review at youtube, he mentions some installation tips.
sammysam52
Apr 24, 01:52 PM
I am having to write a program that determines whether a number is a palindrome or not using Python Programming. The program uses an input function for the number and then returns the results. All the research I have done has turned out results with Java and other non Python programs. Any help is appreciated. Thank you:)
mad jew
Dec 16, 06:05 PM
Yeah, a restart may help. :)
jamesdav15
Mar 11, 10:54 AM
I'm going go to early, around 10/11. Will let you all know how long the line is.
iceterminal
May 4, 12:11 PM
Hi all,
I've sold my sgs i9000 and switched to iphone 3gs and i am more than happy now. iphone ui is really so smooth and things are cool. I recommend to switch to all android users that got fed up with bugs and lags.
I've purchased few apps yesterday and i wonder what happens if i switch to iphone 4 (or ip5) in the future? Will i have to re purchase them again?
Not at all. As long as you sync/backup your iPhone you'll be able to move them onto your new iPhone at any time. They are linked to the Apple ID that purchased them.
I've sold my sgs i9000 and switched to iphone 3gs and i am more than happy now. iphone ui is really so smooth and things are cool. I recommend to switch to all android users that got fed up with bugs and lags.
I've purchased few apps yesterday and i wonder what happens if i switch to iphone 4 (or ip5) in the future? Will i have to re purchase them again?
Not at all. As long as you sync/backup your iPhone you'll be able to move them onto your new iPhone at any time. They are linked to the Apple ID that purchased them.
alphadog111
Apr 16, 04:55 PM
The stuff used on the heatsink is NOT an adhesive. It is just a compound that maximises the heat transfers between CPU and heatsink. The heatsink MUST be held down with the screws.
From the looks of it, you've either got a damaged bottom case (screw mount knocked off) or a bottom case for the wrong model (slightly different fittings).
Is the missing screws and the compound thats causing the "error restart message" when i load the desktop? How do I get the compound to reattach it on the CPU?
From the looks of it, you've either got a damaged bottom case (screw mount knocked off) or a bottom case for the wrong model (slightly different fittings).
Is the missing screws and the compound thats causing the "error restart message" when i load the desktop? How do I get the compound to reattach it on the CPU?
AppleMatt
Dec 14, 01:03 PM
http://www.sogoodblog.com/2010/12/14/chipotle-social-media/
AppleMatt
AppleMatt
Tidak ada komentar:
Posting Komentar