tnite
03-17 01:05 PM
Hi Friends,
I have a confusing situation here. Hope someone can help me with this. This is a bit complicated so please bear with me.
I fall under ROW. My first LC was filed in Feb 2005 under RIR and it was in BEC for a long time. So my company filed another LC under PERM in March 2007 which was approved very quickly and I-140 was filed for that.
Then in April 2007 the first LC (PD Feb 2005) was approved and we filed an I-140 for that as well. This was converted to PP and was approved very quickly.
Then in June 07 when my Feb 2005 PD became current we filed for 485 based on that older LC. However in the receipt notice the Priority Date box was blank which I did not notice till yesterday.
My other I-140 with PD March 2007 was pending till Jan 2008 and was approved in mid January. On the same day it was approved I noticed a soft LUD on my pending I-485 which has nothing to do with that I-140.
Now my question is, is it possible that USCIS mistakenly linked my recently approved I-140 (PD Mar 2007) to the pending I-1485? Is that possible? The reason for this worry is the soft LUD that saw on my 485 as mentioned above and the fact that my 485 receipt notice does not have a PD printed on it.
Is there anyway that I can verify which PD is linked to my 485 by contacting USCIS? I have heard of INFOPASS, would that help? If so how can I get an appointment? If as I suspect , the 485 is now linked to the wrong PD, is it difficult to have it corrected? Please let me know.
Also is it common to have the PD box blank in the 485 receipt notice?
Thanks in Advance!!!!!
When you filed I485 , you have to send a copy of the I140. If you had sent in the one with the old PD then thats what USCIS will go by.
Call USCIS custonmer service and see what they tell you.
I have a confusing situation here. Hope someone can help me with this. This is a bit complicated so please bear with me.
I fall under ROW. My first LC was filed in Feb 2005 under RIR and it was in BEC for a long time. So my company filed another LC under PERM in March 2007 which was approved very quickly and I-140 was filed for that.
Then in April 2007 the first LC (PD Feb 2005) was approved and we filed an I-140 for that as well. This was converted to PP and was approved very quickly.
Then in June 07 when my Feb 2005 PD became current we filed for 485 based on that older LC. However in the receipt notice the Priority Date box was blank which I did not notice till yesterday.
My other I-140 with PD March 2007 was pending till Jan 2008 and was approved in mid January. On the same day it was approved I noticed a soft LUD on my pending I-485 which has nothing to do with that I-140.
Now my question is, is it possible that USCIS mistakenly linked my recently approved I-140 (PD Mar 2007) to the pending I-1485? Is that possible? The reason for this worry is the soft LUD that saw on my 485 as mentioned above and the fact that my 485 receipt notice does not have a PD printed on it.
Is there anyway that I can verify which PD is linked to my 485 by contacting USCIS? I have heard of INFOPASS, would that help? If so how can I get an appointment? If as I suspect , the 485 is now linked to the wrong PD, is it difficult to have it corrected? Please let me know.
Also is it common to have the PD box blank in the 485 receipt notice?
Thanks in Advance!!!!!
When you filed I485 , you have to send a copy of the I140. If you had sent in the one with the old PD then thats what USCIS will go by.
Call USCIS custonmer service and see what they tell you.
Rockford
08-31 10:20 AM
Hey guys I guess now interim EAD is possible if application is pending for 75 days.Got this information on murthy's site(In weekly Bulletin).Below is the link
http://www.murthy.com/bulletin.html
I hope I understood it correctly.
What do all of you say?
If you are referring to this paragraph , The answer is , field offices will NOT issue interim EAD. They can however request one and I think that is what they do today (Some field offices, as per Katri)when you take an appointment at local office to raise this issue:
The CIS Ombudsman has been engaging in discussions with the USCIS filed offices, in an effort to institute a uniform policy to assist EAD applicants with applications pending for 75 days or more. Since interim EAD production could take several days, the Ombudsman believes it should not be necessary for an applicant to wait for 90 days before requesting an interim EAD at the field office. Field offices no longer issue EADs; however, they can request interim EADs for pending applications. Mr. regrets that some field offices are not focused on helping their customers to continue uninterrupted employment, when the customers are doing their part to abide by the laws and maintain the validity of their EADs.
�MurthyDotCom
The CIS Ombudsman requested teleconference participants to notify his office if and when a field office refuses to request the production of an interim EAD card, when the application has been pending for approximately 75 days from the date of application.
http://www.murthy.com/bulletin.html
I hope I understood it correctly.
What do all of you say?
If you are referring to this paragraph , The answer is , field offices will NOT issue interim EAD. They can however request one and I think that is what they do today (Some field offices, as per Katri)when you take an appointment at local office to raise this issue:
The CIS Ombudsman has been engaging in discussions with the USCIS filed offices, in an effort to institute a uniform policy to assist EAD applicants with applications pending for 75 days or more. Since interim EAD production could take several days, the Ombudsman believes it should not be necessary for an applicant to wait for 90 days before requesting an interim EAD at the field office. Field offices no longer issue EADs; however, they can request interim EADs for pending applications. Mr. regrets that some field offices are not focused on helping their customers to continue uninterrupted employment, when the customers are doing their part to abide by the laws and maintain the validity of their EADs.
�MurthyDotCom
The CIS Ombudsman requested teleconference participants to notify his office if and when a field office refuses to request the production of an interim EAD card, when the application has been pending for approximately 75 days from the date of application.
gnutin
06-10 02:36 PM
Thanks for your immediate response, gnutin and thomachan72.
Mr.gnutin,
Actually I phrased question no. 3 wrongly. I think this is the right way of phrasing it for an answer which I was expecting.
As I came to U.S in 2006 and if i apply for my H1B Transfer in September 2010, please let me know how long will INS have it valid with the following scenario
1. If my labor from my previous employer (A) is approved (which in my case)
2. If my I140 from employer (A) is approved before September 2010 (Actually it will be filed in two weeks from now)
Thanks and Regards,
H1B transfer has nothing to do with your Labor or I-140 approval. The "transfer" is really like a new H1B application and will be treated as such. The I-140 approval comes into play only if you are past 6 years of your H1B, which you are not.
Mr.gnutin,
Actually I phrased question no. 3 wrongly. I think this is the right way of phrasing it for an answer which I was expecting.
As I came to U.S in 2006 and if i apply for my H1B Transfer in September 2010, please let me know how long will INS have it valid with the following scenario
1. If my labor from my previous employer (A) is approved (which in my case)
2. If my I140 from employer (A) is approved before September 2010 (Actually it will be filed in two weeks from now)
Thanks and Regards,
H1B transfer has nothing to do with your Labor or I-140 approval. The "transfer" is really like a new H1B application and will be treated as such. The I-140 approval comes into play only if you are past 6 years of your H1B, which you are not.
snathan
02-01 09:35 PM
Q. Who is an optimist?
A. A dude on EB3 with priority date of Aug 2005, looking for a "safe secure" future :D
Joking aside dude, Pay off your debts, buy gold for the wife ( investing in the wife may be the surest way to have a safe secure future lol)), keep some CDs, keep handy cash ( a tleast 6 months of pay), good life insurance, medical insurance, max out 401K, and then if you still have some left you can dabble in stocks.
How come a wife can have another wife...:D if you are not aware the OP is a girl.
You didnt tell which movie cd...?
A. A dude on EB3 with priority date of Aug 2005, looking for a "safe secure" future :D
Joking aside dude, Pay off your debts, buy gold for the wife ( investing in the wife may be the surest way to have a safe secure future lol)), keep some CDs, keep handy cash ( a tleast 6 months of pay), good life insurance, medical insurance, max out 401K, and then if you still have some left you can dabble in stocks.
How come a wife can have another wife...:D if you are not aware the OP is a girl.
You didnt tell which movie cd...?
more...
soni7007
09-15 12:13 PM
I am glad that some of us are positive moving fwd with this idea. There are some other threads talking about other action items (write letters etc.). I think the first thing we need to do is to join hands and then decide a game plan. We need to concentrate the total energy at one point. What do you think?
sampatvijay
01-14 01:15 PM
:) CONGRATULATIONSSSSSSSSSSSSSSSSSSSSss:)
more...
cox
November 14th, 2007, 08:50 AM
HI Keith,
Having shot 10's of thousands of pics on my cameras, I can tell you that I have formatted each of my CF cards only once, when I bought them. I've never had to reformat them for any reason. As Mats said, be careful not to pull them out of the camera when it's writing and you should have no problems.
There are many sensor cleaning threads here, but I'll echo the blower advice. The less you touch the sensor, the better off you are. I use an oilless diaphragm air compressor (for airbrush use, ~$100). It gives higher pressure air than a bulb blower, and has no propellants or oil in it that could end up on the camera. Most 'real' camera stores have sensor cleaning pads & solution these days. I too have used cotton swabs, and they will work, provided you don't leave any cotton fibers behind, which are a worse problem than the dust.
Good luck & have fun!
Having shot 10's of thousands of pics on my cameras, I can tell you that I have formatted each of my CF cards only once, when I bought them. I've never had to reformat them for any reason. As Mats said, be careful not to pull them out of the camera when it's writing and you should have no problems.
There are many sensor cleaning threads here, but I'll echo the blower advice. The less you touch the sensor, the better off you are. I use an oilless diaphragm air compressor (for airbrush use, ~$100). It gives higher pressure air than a bulb blower, and has no propellants or oil in it that could end up on the camera. Most 'real' camera stores have sensor cleaning pads & solution these days. I too have used cotton swabs, and they will work, provided you don't leave any cotton fibers behind, which are a worse problem than the dust.
Good luck & have fun!
waiting4gc
08-08 07:55 PM
There is a seasonal temporary visa that you can get if you are in a profession where there is extra demand in some part of the year. For e.g. a friend of mine got this visa initially as she is a CPA so there is more work for them around middle of the year.
My H1 has been denied on Master's quota as I filed for H1 in April and I graduated in May. The reason for denial is that "on notice day, I was not graduate'.
My EAD will be expiring in May 2008 and even If I apply for New H1 in next April, I can not start working till October 2008.
In this bad situation, what are the option I have not to leave the country. Please advise as soon as possible
My H1 has been denied on Master's quota as I filed for H1 in April and I graduated in May. The reason for denial is that "on notice day, I was not graduate'.
My EAD will be expiring in May 2008 and even If I apply for New H1 in next April, I can not start working till October 2008.
In this bad situation, what are the option I have not to leave the country. Please advise as soon as possible
more...
amsgc
06-15 11:40 PM
I just read the instructions on initial evidence on the I-485. Nowhere does it ask you for passport details - only for page with nonimmigrant visa, if obtained in the last one year.
Why are people asking questions about passport validity? What am I missing here - please enlighten.
Thank you.
Ams
Passport should be valid for more than 6 months for applying I 485.
If somebody can answer that would begreat
Why are people asking questions about passport validity? What am I missing here - please enlighten.
Thank you.
Ams
Passport should be valid for more than 6 months for applying I 485.
If somebody can answer that would begreat
sam_hoosier
06-06 05:29 PM
Yes, you should be able to use AC21 to change employment (subject to the AC21 restrictions).
more...
shaikhshehzadali
07-11 11:35 AM
No big deal man...mine was approved in 2 days from NSC..;)
dilipb
04-21 06:57 PM
It appears that everyones experience is going to be different.
Lets see what happens in Pittsburgh PA for my friend.
Lets see what happens in Pittsburgh PA for my friend.
more...
eb3_nepa
01-08 04:22 PM
How did you guys manage to get H1's so recently from H4?
Is there a way that H4 are exempt from the H1 quota?
Is there a way that H4 are exempt from the H1 quota?
peekay
06-29 03:03 PM
Hi,
I dont have a direct answer to your question but I do know that insurance has to be taken within the 30 days of your wife's arrival in US. I had the same situation where I applied for insurance on 32nd day and got a reply from the insurance company that I have to apply within 30 days. I finally was able to convince them and take the insurance. Try your luck by talking to some insurance company like BCBS or Humana. They should be able to provide more info. I cant be of more help than this.
Peekay
I dont have a direct answer to your question but I do know that insurance has to be taken within the 30 days of your wife's arrival in US. I had the same situation where I applied for insurance on 32nd day and got a reply from the insurance company that I have to apply within 30 days. I finally was able to convince them and take the insurance. Try your luck by talking to some insurance company like BCBS or Humana. They should be able to provide more info. I cant be of more help than this.
Peekay
more...
singhsa3
11-15 10:01 AM
We are in agony and pain. Let us scream so loud that even deafs may lend their ears.
conundrum
03-12 11:53 AM
Congrats!!
more...
gcisadawg
11-14 04:14 PM
Do you guys see what happens after January 2nd (or after 6 months of receipt date)....Most of the contractors (who applied their 485 in july) will look for permanent job OR demand more money from their employers...OR more benefits from employer. Employers try to be calm and don't conflict with us. What do u guys think??
Is it going to be tough for desi consultants to earn more money by placing their employees as consultants? Because there are already so many people ready to do permanent job.
As far as I know, IT department of most companies are cutting down on IT resources and trying to either outsource or have captive centers in low cost destinations. Given that trend, I doubt if more permanent openings are available.
However, I see a spike in "Programm manager" type job where an on-shore person manages a team of off-shore developers sitting in countries like India.
What say?
Is it going to be tough for desi consultants to earn more money by placing their employees as consultants? Because there are already so many people ready to do permanent job.
As far as I know, IT department of most companies are cutting down on IT resources and trying to either outsource or have captive centers in low cost destinations. Given that trend, I doubt if more permanent openings are available.
However, I see a spike in "Programm manager" type job where an on-shore person manages a team of off-shore developers sitting in countries like India.
What say?
wandmaker
08-25 09:39 AM
Hi,
My labour was approved on 23-Jan-08 and its expiration date is 21-Jul-08.
I recently got my 140 receipt notice with receipt date as 24-Jul-08.
I am wondering is my 140 is filed with in the valid time.
Is there any rule like do we need to file 140 with in 180 days of labour approval.If so will my 140 get approval or denial.
pl give me the response.
Thanks for looking this.
As long as your application reached the mail room on or before Jul 21, 2008 then you are good to go and don't worry about the date on 797 receipt notice and remember to save the delivery proof. If it has reached after Jul 21, 2008 then your case will be denied because your labor is no longer valid from Jul 22, 2008 - you will have to start everything from scratch
My labour was approved on 23-Jan-08 and its expiration date is 21-Jul-08.
I recently got my 140 receipt notice with receipt date as 24-Jul-08.
I am wondering is my 140 is filed with in the valid time.
Is there any rule like do we need to file 140 with in 180 days of labour approval.If so will my 140 get approval or denial.
pl give me the response.
Thanks for looking this.
As long as your application reached the mail room on or before Jul 21, 2008 then you are good to go and don't worry about the date on 797 receipt notice and remember to save the delivery proof. If it has reached after Jul 21, 2008 then your case will be denied because your labor is no longer valid from Jul 22, 2008 - you will have to start everything from scratch
thirumalkn
07-26 05:11 PM
Thanks for the info vxg. Thanks for sharing.
So, did you notify USCIS at any stage about your promotion ?
My duties increased, in past i was doing more tech work now i mostly manage people who do the same tech work but as i said it's all subjected to the lawyer and employer.
So, did you notify USCIS at any stage about your promotion ?
My duties increased, in past i was doing more tech work now i mostly manage people who do the same tech work but as i said it's all subjected to the lawyer and employer.
telekinesis
09-06 03:59 PM
I did it a little different: first, I took the one pixel wide column marque tool and picked a vertical spot that I wanted to stretch; second, I used edit >> define pattern and used the marque tool and made it the length I wanted and filled it with my pattern edit >> fill and pick our pattern that ou just defined; third, duplicate layers and mess with color dodge, screen, multipy, color burn, and so on!
prav27
07-09 12:33 PM
We got RFE for my wife case too but it specifically mentioned that in the submitted report it was not cleraly mentioned if the skin test was done and so new medical form with TB Skin test( last time the Doctor just did the x-ray) needs to be submitted
Tidak ada komentar:
Posting Komentar