joepunk
Apr 14, 11:21 AM
Someone's going to get fired for sure.
Doozy
Nov 4, 02:36 PM
Your requirements are not very demanding and I think you can accomplish all you need including your hi-rez images by buying some webspace from a host that offers "Fantastico". Fantastico is a open source auto-installer which will alow you to install a gallery, a blog, and much more.
KeithPratt
Apr 15, 11:58 AM
Maybe Version 5 is better in saving the correct PAL-solution not adding pixels that are not needed, while recording.
If you've got your VCR hooked up to a DV camcorder and the DV camcorder attached to your Mac via Firewire, you can think of capturing it in iMovie as a file transfer. The camcorder is encoding the VCR's output to standard PAL DV, and your Mac is just recording that data.
If you try to do any colour correction or what have you in iMovie, a different engine in different versions might result in different quality. But these versions are so old I don't think you'll find much comparison online � probably best to just suck it and see.
If you've got your VCR hooked up to a DV camcorder and the DV camcorder attached to your Mac via Firewire, you can think of capturing it in iMovie as a file transfer. The camcorder is encoding the VCR's output to standard PAL DV, and your Mac is just recording that data.
If you try to do any colour correction or what have you in iMovie, a different engine in different versions might result in different quality. But these versions are so old I don't think you'll find much comparison online � probably best to just suck it and see.
dazzer21
Nov 24, 11:06 AM
I'll try to explain this as best I can;
I have a web page produced in Dreamweaver made up of 6 different jpegs.
Along the top is a row of four jpegs, all next to each other which form a menu. They are are set up as rollovers so the text 'glows' when you roll over them.
Under these is a full width jpeg on which is shown an image and some accompanying copy
Under this is a final full width jpeg which acts as a footer - it has a logo on it.
Each of these images has originally been created as a layered Photoshop file. On each of the six files, the bottom layer is the same solid blue. Dreamweaver is set up to have a page background of exactly the same blue so that background colour fills the whole screen.
The problem is, that when these images are converted to jpegs, the background blue is not consistent. On the rollovers, the blue changes further when it's activated. So in essence, you can see where each jpeg finished and the next one ends.
I've tried doing a straight 'save as', and a 'save for web and devices'; nothing seems to work. At the same time, I'm trying to keep the file sizes down as much as possible, but it's just not working out.
Any ideas?
Many thanks.
I have a web page produced in Dreamweaver made up of 6 different jpegs.
Along the top is a row of four jpegs, all next to each other which form a menu. They are are set up as rollovers so the text 'glows' when you roll over them.
Under these is a full width jpeg on which is shown an image and some accompanying copy
Under this is a final full width jpeg which acts as a footer - it has a logo on it.
Each of these images has originally been created as a layered Photoshop file. On each of the six files, the bottom layer is the same solid blue. Dreamweaver is set up to have a page background of exactly the same blue so that background colour fills the whole screen.
The problem is, that when these images are converted to jpegs, the background blue is not consistent. On the rollovers, the blue changes further when it's activated. So in essence, you can see where each jpeg finished and the next one ends.
I've tried doing a straight 'save as', and a 'save for web and devices'; nothing seems to work. At the same time, I'm trying to keep the file sizes down as much as possible, but it's just not working out.
Any ideas?
Many thanks.
more...
dasmb
Apr 14, 12:32 PM
These are static graphics, right? Technically speaking, these files are loaded from the server into RAM by the program, and if there isn't enough RAM it'll write to a local scratch disk. Once the user starts working, they operate on the data in RAM or the scratch disk -- NOT the original file. This allows a full undo/revert workflow. This means that merely by opening the files, they're performing the equivalent of pulling them to the local disk and then opening them...and they're doing so in one step.
If an issue were to occur while saving the file, the server's copy may be corrupted. However, the user would be alerted and they could save the file locally.
Get off their case :D
If an issue were to occur while saving the file, the server's copy may be corrupted. However, the user would be alerted and they could save the file locally.
Get off their case :D
Jasonbot
Apr 16, 01:14 PM
You could take all the things people hate about gamertags, and then be really ironic and thus the coolest mofo on XBL :p
So... random Xs, random numbers, lots of l33t, the usage of a famous character's name as though it were your own... *and off the gamertag machine goes...*
XxX_s3xI_m45T3R_69_cH3f_pWnz4g3_xXx_91
Classic, just classic!
I'd prefer just Se><1_m4573R_cH3F though, very funny!
So... random Xs, random numbers, lots of l33t, the usage of a famous character's name as though it were your own... *and off the gamertag machine goes...*
XxX_s3xI_m45T3R_69_cH3f_pWnz4g3_xXx_91
Classic, just classic!
I'd prefer just Se><1_m4573R_cH3F though, very funny!
more...
crazzyeddie
Nov 15, 07:47 PM
Just a quick question... I downloaded the SMP Intel version for my MacBook Pro, but I can't figure out how to pause it! Last night I did a ctrl-c (quit) and it closed out... but this morning it started all over! What on earth is the "pause" command?
(yes I know I don't need to stop it for most things, but I like to at night and while I study because of the extra noise it creates.)
(yes I know I don't need to stop it for most things, but I like to at night and while I study because of the extra noise it creates.)
philipma1957
May 2, 04:07 PM
the 2.33 c2d is the fastest cpu in that socket. this was the top of the line mini mod in 2007/8. the socket changed in 09 and the cpu has been glued/soldered in tight
more...
Hrududu
May 3, 11:40 AM
I have acquired an iMac g4 700 with only a cd drive. I would like to install Tiger via a retail DVD. Can I place the DVD in another machine and install via FireWire?
Thx rob
Sure can. I've done it a few times. Just boot the iMac G4 in Target Disk Mode and then install the OS onto its drive from another PowerPC Mac with a DVD drive.
Thx rob
Sure can. I've done it a few times. Just boot the iMac G4 in Target Disk Mode and then install the OS onto its drive from another PowerPC Mac with a DVD drive.
eastercat
Mar 6, 03:59 PM
The current jb programs aren't as easy as jailbreakme.com. Considering the OP is too lazy to research what's available, the jb programs might require too much effort. :rolleyes:
It is very easy to jb 4.2.1 now. The improvements to the OS certainly make it worthwhile as does the ability to run all the latest apps. Virtual memory hack is no longer required.
It is very easy to jb 4.2.1 now. The improvements to the OS certainly make it worthwhile as does the ability to run all the latest apps. Virtual memory hack is no longer required.
more...
awrootbeer
Sep 12, 12:26 PM
Originally posted by edvniow
Yes, but they were the ones that first came up with the Powermac pic, if I'm not mistaken. :)
True, but it's because it seems like MB (I can never get the spelling right) just posts anything they sent. They seem to have gotten lucky on that one (if that's what you can call it :-)
But it's still a fun rumor. Although I would personally prefer their last rumor over it. (Dual G4s)
Yes, but they were the ones that first came up with the Powermac pic, if I'm not mistaken. :)
True, but it's because it seems like MB (I can never get the spelling right) just posts anything they sent. They seem to have gotten lucky on that one (if that's what you can call it :-)
But it's still a fun rumor. Although I would personally prefer their last rumor over it. (Dual G4s)
ortuno2k
Dec 21, 12:45 AM
Ouch!
That looks like a real messed up PB!
:eek:
That looks like a real messed up PB!
:eek:
more...
amusiccale
Jun 20, 08:51 AM
As for pricing considerations, refurb. 3rd gens (4gb) start at $99 in the apple store, ipod2sell suggests $80. That is, of course, without the engraving to consider. I would, however, reemphasize that aside from the engraving, the iPod is in pristine condition.
katie ta achoo
Sep 24, 12:54 PM
How big do you wanna go?
(If you can deal with the ugly :p) the Dell 2005 FPW may be the way to go. 20" LCD.
It's around $500, so you could get your dual-monitor on, or get one for yourself and one for me, too. :)
(If you can deal with the ugly :p) the Dell 2005 FPW may be the way to go. 20" LCD.
It's around $500, so you could get your dual-monitor on, or get one for yourself and one for me, too. :)
more...
EatMyApple
Apr 25, 06:37 PM
Any ideas for a fix? Thanks!
Mr. Anderson
Jul 6, 08:31 PM
So I have a Rev C. 667 powerbook and it won't boot up when I press the power button?
Any thoughts on this before I make a trip to the Apple store.....(oh, and its a work computer and they didn't get AppleCare - stupid I know, but I wasn't paying for it.....)
D
Any thoughts on this before I make a trip to the Apple store.....(oh, and its a work computer and they didn't get AppleCare - stupid I know, but I wasn't paying for it.....)
D
more...
nyzwerewolf
Apr 21, 08:04 PM
20 minutes later...
http://img135.imageshack.us/img135/2251/screenshot20110421at902.png (http://img135.imageshack.us/i/screenshot20110421at902.png/)
http://img135.imageshack.us/img135/2251/screenshot20110421at902.png (http://img135.imageshack.us/i/screenshot20110421at902.png/)
BC2009
Sep 9, 06:18 PM
:)
aljawad
Jan 6, 11:52 AM
The date is getting closer, we need to decide a place, can we make it a Starbucks or something, it IS San Francisco! I will be there for sure.
:apple:world
Sounds good, I just checked my iPhone and found several Starbucks - duh :D - around Moscone center. Maybe a native San Franciscan can suggest one of them, or an alternative in any case? Veterans of similar meetings from previous years: what do you think??
I'll be wearing my original MacOS X t-shirt :)
:apple:world
Sounds good, I just checked my iPhone and found several Starbucks - duh :D - around Moscone center. Maybe a native San Franciscan can suggest one of them, or an alternative in any case? Veterans of similar meetings from previous years: what do you think??
I'll be wearing my original MacOS X t-shirt :)
overanalyzer
Oct 22, 04:10 PM
During the iPhone launch, we had some hands-on and a meeting also.
Ooh, a much rumored but rarely seen Apple Store employee posting in the forums (at least while declaring your employment). I guess if you only post about things from 4 months ago, they can't get mad. :)
Ooh, a much rumored but rarely seen Apple Store employee posting in the forums (at least while declaring your employment). I guess if you only post about things from 4 months ago, they can't get mad. :)
RobertD33
Jul 9, 02:35 PM
hmm
Curse
Apr 28, 08:20 PM
I should add that I used the install disks that came with the computer.
shanmugam
May 4, 11:33 PM
Can any of the 2011 iMac owners check if any of the components in their newly bought iMac operate underclocked?
Apple has, in the past, been known to do this to maintain a certain power consumption or thermal level.
This could explain some of the "low" scores we are seeing of late.
nope they are fine and stock CPUs
2.5Ghz/2.7Ghz i5s are 65watts and good performance CPUs
Apple has, in the past, been known to do this to maintain a certain power consumption or thermal level.
This could explain some of the "low" scores we are seeing of late.
nope they are fine and stock CPUs
2.5Ghz/2.7Ghz i5s are 65watts and good performance CPUs
LimeiBook86
Oct 16, 08:25 PM
Wow that was cool. Great job hob! :D
Tidak ada komentar:
Posting Komentar