ddtlm
Oct 12, 03:30 PM
Wow I missed a lot by spending all of Friday away from this board. I am way behind in posts here, and I'm sure I'll miss a lot of things worth comment. But anyway, the code fragment:
int x1,x2,x3;
for (x1=1; x1<=20000; x1++) {
for(x2=1; x2<=20000; x2++) {
x3 = x1*x2;
}
}
Is a very poor benchmark. Compilers may be able to really dig into that and make the resulting executable perform the calculate radically different. In fact, I can tell you the answer outright: x1=20000, x2=20000, x3 = 400000000. It took me 2 seconds or so. Does this mean that I am a better computer than a G4 and a P4? No, it means I realized that the loop can be reduced to simple data assignments. I have a better compiler, thats it.
Anyway, lets pretend that for whatever reason compilers did not simplify that loop AT ALL. Note that this would be a stupid stupid compiler. At each stage, x1 is something, we ++x2, and we set x3 = x1 * x2. Now notice that we cannot set x3 until the result of X2++ is known. On a pipelined processor that cannot execute instructions out of order, this means that I have a big "bubble" in the pipeline as I wait for the new x2 before I can multiply. However, after the x3 is started into the pipe, the next instruction is just another x2++ which does not depend on x3, so I can do it immediately. On a 7-stage in-order chip like a G4, this means that I fill two stages of the pipe and then have to wait for the results on the other end before I can continue. You see that this is very inefficient (28% or so). However, the G3 is a 4-stage design and so 2/4 of the stages can stay busy, resulting in a 50% efficientcy (so a 700mhz G3 is "the same as" a 350mhz G3 at 100% and a 800mhz G4 is "the same as" a 210mhz G4 at 100%). These are of course simplified cases, the actual result may very a bit for some obscure reason.
Actually the above stuff is inaccurate. The G3 sports 2 integer units AFAIK, so it can do x3 = x1*x2 at the same time as it is doing x2++ (for the next loop of course, not this one). This means that both pipes start one bit of work, then wait for it to get out the other end, then do one bit of work again. So this is 25% efficientcy. A hypothetical single-pipe G3 would do x3 = x1*x3 and then do x2++, however it could not do x3 = x1 * x2 again until the x2++ was out the other end, which takes 4 cycles and started one after the previos x3 = x1*x2, which should mean 3 "bubble" stages and an efficientcy of 20%.
Actually, it may be worse than that. Remember that this is in a loop. The loop means a compare instruction (are we done yet?) followed by a jump depending on the results of the compare. We therefore have 4 instructions in PPC I think per loop, and we can't compare x2 to 20000 until x2++ has gone through all the pipe stages. (Oh no!) And we can't jump until we know r]the result of the compare (oh no!). Seeing the pattern? Wanna guess what the efficientcy is for a really stupid compiled version of this "benchmark"? A: really freaking low.
I'll see about adding more thoughts later.
int x1,x2,x3;
for (x1=1; x1<=20000; x1++) {
for(x2=1; x2<=20000; x2++) {
x3 = x1*x2;
}
}
Is a very poor benchmark. Compilers may be able to really dig into that and make the resulting executable perform the calculate radically different. In fact, I can tell you the answer outright: x1=20000, x2=20000, x3 = 400000000. It took me 2 seconds or so. Does this mean that I am a better computer than a G4 and a P4? No, it means I realized that the loop can be reduced to simple data assignments. I have a better compiler, thats it.
Anyway, lets pretend that for whatever reason compilers did not simplify that loop AT ALL. Note that this would be a stupid stupid compiler. At each stage, x1 is something, we ++x2, and we set x3 = x1 * x2. Now notice that we cannot set x3 until the result of X2++ is known. On a pipelined processor that cannot execute instructions out of order, this means that I have a big "bubble" in the pipeline as I wait for the new x2 before I can multiply. However, after the x3 is started into the pipe, the next instruction is just another x2++ which does not depend on x3, so I can do it immediately. On a 7-stage in-order chip like a G4, this means that I fill two stages of the pipe and then have to wait for the results on the other end before I can continue. You see that this is very inefficient (28% or so). However, the G3 is a 4-stage design and so 2/4 of the stages can stay busy, resulting in a 50% efficientcy (so a 700mhz G3 is "the same as" a 350mhz G3 at 100% and a 800mhz G4 is "the same as" a 210mhz G4 at 100%). These are of course simplified cases, the actual result may very a bit for some obscure reason.
Actually the above stuff is inaccurate. The G3 sports 2 integer units AFAIK, so it can do x3 = x1*x2 at the same time as it is doing x2++ (for the next loop of course, not this one). This means that both pipes start one bit of work, then wait for it to get out the other end, then do one bit of work again. So this is 25% efficientcy. A hypothetical single-pipe G3 would do x3 = x1*x3 and then do x2++, however it could not do x3 = x1 * x2 again until the x2++ was out the other end, which takes 4 cycles and started one after the previos x3 = x1*x2, which should mean 3 "bubble" stages and an efficientcy of 20%.
Actually, it may be worse than that. Remember that this is in a loop. The loop means a compare instruction (are we done yet?) followed by a jump depending on the results of the compare. We therefore have 4 instructions in PPC I think per loop, and we can't compare x2 to 20000 until x2++ has gone through all the pipe stages. (Oh no!) And we can't jump until we know r]the result of the compare (oh no!). Seeing the pattern? Wanna guess what the efficientcy is for a really stupid compiled version of this "benchmark"? A: really freaking low.
I'll see about adding more thoughts later.
emotion
Sep 20, 08:27 AM
Problem is, doing a PVR would be extremely expensive. Other than things like Tivo that have monthly fees, PVR's haven't really caught on, and the price is the biggest reason.
This must be a US-centric view. Here (UK) PVRs with twin Freeview (DTT) tuners and 80GB HDs are everywhere. And they are very cheap now (120 quid upwards).
I'm thinking of ditching my cable provider (NTL, I only get it for Sky One, which is just Simpsons repeats) and going with something like this:
http://www.topfield.co.uk/terrestrialequipment.htm
Apparently you can DL what you record to your Mac (USB). I suspect you'll then be able to play that on iTV.
This must be a US-centric view. Here (UK) PVRs with twin Freeview (DTT) tuners and 80GB HDs are everywhere. And they are very cheap now (120 quid upwards).
I'm thinking of ditching my cable provider (NTL, I only get it for Sky One, which is just Simpsons repeats) and going with something like this:
http://www.topfield.co.uk/terrestrialequipment.htm
Apparently you can DL what you record to your Mac (USB). I suspect you'll then be able to play that on iTV.
aswitcher
Jul 12, 03:46 PM
Smallish mid-tower case
Intel Core 2 Duo @ 2.8Ghz or better
1GB RAM
250GB SATA 3.0 HD
1-PCIe x16 Slot
1-Standard PCI Slot
6-USB 2.0 ports (One in front)
1- Firewire 800 port (in front)
Dual Layer DVD
Onboard 10/100/1000 (I don't care if its wireless, but a wireless opition would be nice but not necessary)
Graphics Card should be x1600XT or better with 256mb RAM
I want it at or less than $1199.00
4 ram slots so I can get 2 gig cheap or 4 gig if I want it.
2 x FW 400s well.
BT/AX standard of course.
Frontrow IR port.
Optical audio in/out.
User replacable Ram, HDD, Graphics card(?).
Intel Core 2 Duo @ 2.8Ghz or better
1GB RAM
250GB SATA 3.0 HD
1-PCIe x16 Slot
1-Standard PCI Slot
6-USB 2.0 ports (One in front)
1- Firewire 800 port (in front)
Dual Layer DVD
Onboard 10/100/1000 (I don't care if its wireless, but a wireless opition would be nice but not necessary)
Graphics Card should be x1600XT or better with 256mb RAM
I want it at or less than $1199.00
4 ram slots so I can get 2 gig cheap or 4 gig if I want it.
2 x FW 400s well.
BT/AX standard of course.
Frontrow IR port.
Optical audio in/out.
User replacable Ram, HDD, Graphics card(?).
inkswamp
Oct 26, 03:49 AM
If history serves as a template for the future
Honestly, with Apple, history doesn't serve as much of a template for the future when you think about it.
Honestly, with Apple, history doesn't serve as much of a template for the future when you think about it.
sisyphus
Jul 12, 12:35 AM
So this'll mean one of 3 things.
1) At least 1 Mac Pro will have dual Woodcrests and the rest will have Conroes. Similar to the current PM design.
2) All the Mac Pros will have dual Woodcrests and the iMacs will be upgraded to Conroes. I find this unlikely as Steve-o doesn't like "noisy fans" and the extra heat of the Conroes and faster bus chips etc. would cause the fans to come on more often.
3) The Mac Pros will all have dual Woodcrests, the MBP & iMac will get Meroms, the MB and Mac mini will stick with the Yonahs. So what will use the Conroes? How about the Apple Mac. A simple box with a Conroe processor, a real replaceable video card, no additional PCI slots (those are reseved for the Pro models), with room for one or two full size HDs, a DVD, wireless, bluetooth, etc... This is the real machine most people have been clamouring for. A fast unhampered machine that is more than the iMac but less than the Mac Pro (as will be reflected by the price).
I've never used any of the PCI slots on my PowerMacs and don't expect that I ever will, but the ability to put any video card in is appealing. The iMac is nice and quite useful, but just slightly less than what is needed in many cases. The PowerMac has been more or less uncompromising speed and generally more than I wanted when I bought. With all of the emphasis on the name 'Mac' in the new naming scheme and a more competitive landscape now that we've gone Intel, I think (hope) this is the machine Apple will use to complete its desktop lineup.
The Apple Mac... Nice sound to it, no?
1) At least 1 Mac Pro will have dual Woodcrests and the rest will have Conroes. Similar to the current PM design.
2) All the Mac Pros will have dual Woodcrests and the iMacs will be upgraded to Conroes. I find this unlikely as Steve-o doesn't like "noisy fans" and the extra heat of the Conroes and faster bus chips etc. would cause the fans to come on more often.
3) The Mac Pros will all have dual Woodcrests, the MBP & iMac will get Meroms, the MB and Mac mini will stick with the Yonahs. So what will use the Conroes? How about the Apple Mac. A simple box with a Conroe processor, a real replaceable video card, no additional PCI slots (those are reseved for the Pro models), with room for one or two full size HDs, a DVD, wireless, bluetooth, etc... This is the real machine most people have been clamouring for. A fast unhampered machine that is more than the iMac but less than the Mac Pro (as will be reflected by the price).
I've never used any of the PCI slots on my PowerMacs and don't expect that I ever will, but the ability to put any video card in is appealing. The iMac is nice and quite useful, but just slightly less than what is needed in many cases. The PowerMac has been more or less uncompromising speed and generally more than I wanted when I bought. With all of the emphasis on the name 'Mac' in the new naming scheme and a more competitive landscape now that we've gone Intel, I think (hope) this is the machine Apple will use to complete its desktop lineup.
The Apple Mac... Nice sound to it, no?
*LTD*
Apr 28, 08:30 AM
That's pretty much the definition of a fad.
No, that's nothing more than a shared characteristic of a "fad" and an established product.
Of course, if you consider the iPod a fad, then there's not a lot more to discuss. The iPod led to the iPod Touch, which is the foundation of the iPhone, which others then set about trying to copy.
So, we're looking at a decade-long fad that turned the industry on its head, completely changed the way we consume and acquire music - changing the face of the music industry itself, and which led to the next generation of mobile devices. This fad also continues to sell, though in lower numbers, because the other identical fad includes phone functionality and accordingly sells in record numbers each quarter.
Some fad. Most companies would trade their established products in order to get in on some of these mysterious "long-term" fads that change the face of consumer tech. Would you like it better if we call them "ultra fads" or "super fads"? :confused:
No, that's nothing more than a shared characteristic of a "fad" and an established product.
Of course, if you consider the iPod a fad, then there's not a lot more to discuss. The iPod led to the iPod Touch, which is the foundation of the iPhone, which others then set about trying to copy.
So, we're looking at a decade-long fad that turned the industry on its head, completely changed the way we consume and acquire music - changing the face of the music industry itself, and which led to the next generation of mobile devices. This fad also continues to sell, though in lower numbers, because the other identical fad includes phone functionality and accordingly sells in record numbers each quarter.
Some fad. Most companies would trade their established products in order to get in on some of these mysterious "long-term" fads that change the face of consumer tech. Would you like it better if we call them "ultra fads" or "super fads"? :confused:
skunk
Mar 14, 04:09 PM
what they went through was unprecedented, and beyond the worst case scenarios they were designed for, so if the accident is fully contained (which unfortunately seems less likely as time goes by) the whole system should be commended.Trouble with this argument is that if everything goes completely tits-up with any other kind of power station, the results are indeed containable, but in the case of a nuclear power station, the results can be catastrophically bad. It is taking a worst case scenario to a whole different level.
ddtlm
Oct 11, 01:45 AM
javajedi:
70-ish seconds navtive on a G3
90-ish seconds on a native on a G4
5.9-6-ish seconds running under JVM 1.4.1 on a P4
Admittedly I am getting lost in what all the numbers people have mentioned are for, but looking at these numbers you have here and assuming that they are doing the same task, you can rest assured that the G3/G4 are running far inferior software. AltiVec and SSE2 or not, there is just nothing that can explain this difference other than an unfair playing field. There is no task that a P4 can do 11x or 12x the speed of a G4 (comparing top-end models here). The P4 posseses nothing that runs at 11x or 12x the speed. Not the clock, not the units, the bandwidth to memory and caches are not 11x or 12x as good, it is not 11x better at branch prediction. I absolutely refuse to accept these results without very substantial backing because they contradict reality as I know it. I know a lot about the P4 and the G4, and I know a lot about programming in a fair number of different languages, even some assembly. I insist that these results do not reflect the actual performance of the processors, until irrefutable proof is presented to show how they do.
I guess the 70 and 90 don't surprise me a lot for the G3/G4, depending on clock speed difference. But all this trendy wandwagon-esque G4-bashing is not correct just cause every one else is doing it. There are things about the G3 that are very nice, but the G4 is no slouch compared to it, and given the higher clock that it's pipeline allows, the G3 really can't keep up. The G4 not only sports a better standard FPU, but it also sports better integer units.
70-ish seconds navtive on a G3
90-ish seconds on a native on a G4
5.9-6-ish seconds running under JVM 1.4.1 on a P4
Admittedly I am getting lost in what all the numbers people have mentioned are for, but looking at these numbers you have here and assuming that they are doing the same task, you can rest assured that the G3/G4 are running far inferior software. AltiVec and SSE2 or not, there is just nothing that can explain this difference other than an unfair playing field. There is no task that a P4 can do 11x or 12x the speed of a G4 (comparing top-end models here). The P4 posseses nothing that runs at 11x or 12x the speed. Not the clock, not the units, the bandwidth to memory and caches are not 11x or 12x as good, it is not 11x better at branch prediction. I absolutely refuse to accept these results without very substantial backing because they contradict reality as I know it. I know a lot about the P4 and the G4, and I know a lot about programming in a fair number of different languages, even some assembly. I insist that these results do not reflect the actual performance of the processors, until irrefutable proof is presented to show how they do.
I guess the 70 and 90 don't surprise me a lot for the G3/G4, depending on clock speed difference. But all this trendy wandwagon-esque G4-bashing is not correct just cause every one else is doing it. There are things about the G3 that are very nice, but the G4 is no slouch compared to it, and given the higher clock that it's pipeline allows, the G3 really can't keep up. The G4 not only sports a better standard FPU, but it also sports better integer units.
slinger1968
Oct 26, 10:28 PM
Mac Pro is only true desktop offering from Apple. That's the problem.
Not that many individuals really want that much power.
However, they do intensive enough tasks requiring more power that exceeds what iMac can offer. The price and power ratio of iMac is just not enough.
Apple really needs something between "Pro" and "Consumer".
If iMac offered the ability to work as monitor, I wouldn't be disappointed by this much.
This is getting old already, but what I need is a decent Conroe Desktop with around 1500 USD price tag.Exactly
I hope Apple comes out with a single clovertown chip tower in 07 that runs on cheap standard DDR2 memory and maybe just one optical drive bay. I do like the 4 HD bays though.
On a side note, the people arguing that 8 cores is just too much power are pretty damn funny. There are thousands of people like multimedia that need more cores. I'm not one of them but at least I understand their need. Some poeple on here are clueless.
Not that many individuals really want that much power.
However, they do intensive enough tasks requiring more power that exceeds what iMac can offer. The price and power ratio of iMac is just not enough.
Apple really needs something between "Pro" and "Consumer".
If iMac offered the ability to work as monitor, I wouldn't be disappointed by this much.
This is getting old already, but what I need is a decent Conroe Desktop with around 1500 USD price tag.Exactly
I hope Apple comes out with a single clovertown chip tower in 07 that runs on cheap standard DDR2 memory and maybe just one optical drive bay. I do like the 4 HD bays though.
On a side note, the people arguing that 8 cores is just too much power are pretty damn funny. There are thousands of people like multimedia that need more cores. I'm not one of them but at least I understand their need. Some poeple on here are clueless.
jeffgarden
Mar 18, 05:04 PM
Sorry, i didn't read every post so this may be repeatative but...
If you're going to PAY for music to break drm, just buy it at a store or use Kazaa
OR get napster to go trial, get virtuosa 5.0 to make them mp3's and you're done
why would you pay for something you don't want
If you're going to PAY for music to break drm, just buy it at a store or use Kazaa
OR get napster to go trial, get virtuosa 5.0 to make them mp3's and you're done
why would you pay for something you don't want
blueflame
Aug 29, 10:52 AM
Boo hoo. its a business, waht do they realistically expect?
Bill McEnaney
Apr 23, 12:20 AM
I don't Know what type of Atheists you meet, but most of those in this forum(theists too :D) DO argue their beliefs and do not expect them to go unchecked.
Unchecked in what sense of the word "unchecked?"
Unchecked in what sense of the word "unchecked?"
maxspivak
Sep 12, 03:37 PM
If the want to move into the den or living room, or better yet the home theater, they need more functionality for iTV. As described, it's more of a client for iTunes. Sure, it will automatically download and play movies and songs. But...
Quality: there are differences in iPod quality and home theater / big stereo system. I can happily accept lossy compression for iPod. Not so for multi-thousand-$$$ stereo system. Give me lossless compression from ITMS.
Same goes for movies. I don't want near-DVD quality stretched to my 120" screen. Even with a high-quality video scaler. I want HD - blueray or hd-dvd. I can rent hi-def disks from netflix today. Why, why would I settle for quality worse than what DVDs gave me for the last 10 years???
At least give me an optical disk. Better yet, break some new ground, give me a combo BluRay / HD-DVD drive!!!
Add's functionality -- how 'bout a PVR.
Will I buy one -- probably. But I expected something abit more radical than what they showed.
Quality: there are differences in iPod quality and home theater / big stereo system. I can happily accept lossy compression for iPod. Not so for multi-thousand-$$$ stereo system. Give me lossless compression from ITMS.
Same goes for movies. I don't want near-DVD quality stretched to my 120" screen. Even with a high-quality video scaler. I want HD - blueray or hd-dvd. I can rent hi-def disks from netflix today. Why, why would I settle for quality worse than what DVDs gave me for the last 10 years???
At least give me an optical disk. Better yet, break some new ground, give me a combo BluRay / HD-DVD drive!!!
Add's functionality -- how 'bout a PVR.
Will I buy one -- probably. But I expected something abit more radical than what they showed.
Mord
Jul 13, 10:24 AM
no, i looked up real numbers and took off ~40% which is the amount apple would get off from retail prices.
+ if the low end mac pro has a single cpu if we are lucky it may have an empty socket ready for an upgrade.
+ if the low end mac pro has a single cpu if we are lucky it may have an empty socket ready for an upgrade.
Truffy
Apr 20, 09:32 AM
When you close a window via the famous "X" to the top left of the window, technically it is not closed, as you must officially close the window from the dock or reopen the window and select "quit 'x' app." Underneath the dock there is a circular light informing you that the app is still open. This experience, while it is petty, has caused slight grief. I was use to the absolutism of closing the program the first time by clicking 'X.'
CMD+Q does the same thing, either from within the app, or when it's highlighted when using CMD+TAB to cycle between open apps.
CMD+Q does the same thing, either from within the app, or when it's highlighted when using CMD+TAB to cycle between open apps.
bnerd
Mar 18, 08:35 AM
Hopefully this will lighten the strain on the network.
the vj
Apr 15, 10:03 AM
A few months ago I deleted and started to reject all the people I knew from high school in my Facebook, well, the ones that after almost 20 years came to me to add me as a friend but they were the ones that make my life a living hell and used me and took advantaged and then they turned their back on me.
You know what... get lost!
You know what... get lost!
dethmaShine
Apr 21, 09:16 AM
I own 3 macs and 5 advices. I have a PhD in electrical engineering and designed microprocessors for 14 years, including microprocessors used in many PCs. I've written millions of lines of source code in C, assembler, C++, etc.
And most of the folks I know who use Linux or solaris all day at work to design chips use macs at home and carry iPhones. I don't know a single one of them who uses an android phone (many carry blackberries however).
I am a designer at UK Design Team, TI, UK.
There were only 2 android phones: One of my colleagues (with an HTC desire) who sweared he wouldn't buy an android phone ever. The other one was me; who sold his nexusS at 3/4th the price.
Most of the employees here carry an iPhone 3Gs or an iPhone 4 or a dumbphone. Being one of the designers, designing high speed SerDes, they carry an iPhone.
Why? They better fix their SerDes, rather than a broken Android Phone. Some people have a life.
Apart from office laptops, people carry macbooks and macbook pros; although they are not used in any design work at TI, UK [SerDes].
And most of the folks I know who use Linux or solaris all day at work to design chips use macs at home and carry iPhones. I don't know a single one of them who uses an android phone (many carry blackberries however).
I am a designer at UK Design Team, TI, UK.
There were only 2 android phones: One of my colleagues (with an HTC desire) who sweared he wouldn't buy an android phone ever. The other one was me; who sold his nexusS at 3/4th the price.
Most of the employees here carry an iPhone 3Gs or an iPhone 4 or a dumbphone. Being one of the designers, designing high speed SerDes, they carry an iPhone.
Why? They better fix their SerDes, rather than a broken Android Phone. Some people have a life.
Apart from office laptops, people carry macbooks and macbook pros; although they are not used in any design work at TI, UK [SerDes].
WestonHarvey1
Apr 15, 11:13 AM
You know what IS a choice? Religion. And look at the lengths we go to to protect the right of every last believer to say and do the most ridiculous, hateful things.
By hateful things, you're talking about people like the Westboro Baptist Church and their picket signs, right?
Certainly you don't mean, say, this from the Catechism of the Catholic Church:
2358 The number of men and women who have deep-seated homosexual tendencies is not negligible. [They do not choose their homosexual condition; for most of them it is a trial.] This inclination, which is objectively disordered, constitutes for most of them a trial. They must be accepted with respect, compassion, and sensitivity. Every sign of unjust discrimination in their regard should be avoided. These persons are called to fulfill God�s will in their lives and, if they are Christians, to unite to the sacrifice of the Lord's Cross the difficulties they may encounter from their condition.
You may not agree with that, but if you find it "hateful", you've basically decided to check out of any possibility of rational argument.
By hateful things, you're talking about people like the Westboro Baptist Church and their picket signs, right?
Certainly you don't mean, say, this from the Catechism of the Catholic Church:
2358 The number of men and women who have deep-seated homosexual tendencies is not negligible. [They do not choose their homosexual condition; for most of them it is a trial.] This inclination, which is objectively disordered, constitutes for most of them a trial. They must be accepted with respect, compassion, and sensitivity. Every sign of unjust discrimination in their regard should be avoided. These persons are called to fulfill God�s will in their lives and, if they are Christians, to unite to the sacrifice of the Lord's Cross the difficulties they may encounter from their condition.
You may not agree with that, but if you find it "hateful", you've basically decided to check out of any possibility of rational argument.
Octobot
Oct 30, 07:44 AM
Im definitely ready to upgrade to a new Mac Pro, top of the line..
The fact that the OctoMac could be released anytime between Black Friday and MWSF is really making me anxious..
I fear that they hold it till MW.. and I jump the gun and buy a Quad. I mean Im using a Powerbook 1.67.. and multi-tasking like crazy.. The upgrade is a must.. sometimes Im running Dreamweaver, Photoshop, Illustrator, Itunes, Azureus, After Effects all at the same time.. Obviously as soon as I render, coffee break!
The quad would still kick ass.. Octo would pave the road ahead.
Keeping my eyes peeled on any indication of the TBA Octo. :cool:
L
The fact that the OctoMac could be released anytime between Black Friday and MWSF is really making me anxious..
I fear that they hold it till MW.. and I jump the gun and buy a Quad. I mean Im using a Powerbook 1.67.. and multi-tasking like crazy.. The upgrade is a must.. sometimes Im running Dreamweaver, Photoshop, Illustrator, Itunes, Azureus, After Effects all at the same time.. Obviously as soon as I render, coffee break!
The quad would still kick ass.. Octo would pave the road ahead.
Keeping my eyes peeled on any indication of the TBA Octo. :cool:
L
iJohnHenry
Mar 13, 12:25 PM
Pumping in sea water seems like a panic back up plan.
And if the sea water doesn't reach the bottom of the reactor vessel, well, gravity will cause the bottom to drop out, IF there is sufficient heat to melt the stainless steel.
And if the sea water doesn't reach the bottom of the reactor vessel, well, gravity will cause the bottom to drop out, IF there is sufficient heat to melt the stainless steel.
javajedi
Oct 9, 02:19 PM
Originally posted by gopher
Even more interesting was the advertisement from Apple when the Blue and White G3 came out, and how cool the case was when it opened so simply, they said the "Mac was more open-minded." What amazes me though is there are still just as many Windows users who are biggots in this world as Mac users who are, or even more so. Being though in the minority as we are, Mac users feel all the more need to defend themselves against this biggotted crowd. Apple is trying its hardest to level the playing field by its Switch campaign, and show that it is on the same playing field so that Windows users can't ignore us and demean us with lies, fabrications, and these myths. Only we have some people come on this board who claim that the Mac is much slower. For what purpose? How do we fight ignorance? I work with PCs only because the job I enjoy the most is run by an organization that is biased against Macs, and I'm not in the position to decide how to move Macs into the organization. But it certainly doesn't help to have people who would bad mouth the Mac. It makes us feel more in the minority and feel more the need to defend ourselves. Let's stop this attrocity. Show them what the Mac can do, and it is a viable solution. And Arne, if you are reading these boards, please delete clearly PC biased hate posts ASAP.
Actually you are solidifying my point. How do we fight ignorance? It's very simple. You fight ignorance with facts; you fight ignorance with truth. As far as "But it certainly doesn't help to have people who would bad mouth the Mac..." No. Myself, and the many people on this board who share my viewpoint are not hurting the Mac. We are being sincere, honost and truthful. If you think my post was a "PC biased hate post" you are deeply mistaken. I'm sorry if you can't understand that.
Even more interesting was the advertisement from Apple when the Blue and White G3 came out, and how cool the case was when it opened so simply, they said the "Mac was more open-minded." What amazes me though is there are still just as many Windows users who are biggots in this world as Mac users who are, or even more so. Being though in the minority as we are, Mac users feel all the more need to defend themselves against this biggotted crowd. Apple is trying its hardest to level the playing field by its Switch campaign, and show that it is on the same playing field so that Windows users can't ignore us and demean us with lies, fabrications, and these myths. Only we have some people come on this board who claim that the Mac is much slower. For what purpose? How do we fight ignorance? I work with PCs only because the job I enjoy the most is run by an organization that is biased against Macs, and I'm not in the position to decide how to move Macs into the organization. But it certainly doesn't help to have people who would bad mouth the Mac. It makes us feel more in the minority and feel more the need to defend ourselves. Let's stop this attrocity. Show them what the Mac can do, and it is a viable solution. And Arne, if you are reading these boards, please delete clearly PC biased hate posts ASAP.
Actually you are solidifying my point. How do we fight ignorance? It's very simple. You fight ignorance with facts; you fight ignorance with truth. As far as "But it certainly doesn't help to have people who would bad mouth the Mac..." No. Myself, and the many people on this board who share my viewpoint are not hurting the Mac. We are being sincere, honost and truthful. If you think my post was a "PC biased hate post" you are deeply mistaken. I'm sorry if you can't understand that.
ksz
Nov 2, 06:51 PM
We won't see lower power 4-core offerings until Intel goes 45nm with a unified core design. 45nm should take them to 8-core, maybe 16 or even 24, but Intel doesn't seem too sure just yet.
This page (http://www.anandtech.com/cpuchipsets/showdoc.aspx?i=2866&p=2) from Anandtech, describing power consumption on Kentsfield, brings up the issue of independently varying clock frequency and voltage per core, something that is rather tough to implement. Even at 65nm Intel could do what AMD will do in Barcelona, which is to implement independent clocks for each core.
This page (http://www.anandtech.com/cpuchipsets/showdoc.aspx?i=2866&p=2) from Anandtech, describing power consumption on Kentsfield, brings up the issue of independently varying clock frequency and voltage per core, something that is rather tough to implement. Even at 65nm Intel could do what AMD will do in Barcelona, which is to implement independent clocks for each core.
ct2k7
Apr 24, 06:29 PM
they left out the interesting parts to keep people guessing
It just flows... it just works..
It just flows... it just works..
Tidak ada komentar:
Posting Komentar